{
  "id": "pn-240x420-cift-cerceve-montaj",
  "title": "PION 420x240 Tavan Taşıyıcı ve Bölücü Strüktür Montajı",
  "portalAssembly": true,
  "initialProgress": 0,
  "axisMm": [
    2400,
    600,
    4200
  ],
  "datum": "0 / 240 / 420 cm are system axis levels measured from the lower connector centres; lower centres are 105 mm above the foot sole. Bare extension tips finish 35 mm below the theoretical 420 cm hub centre.",
  "lowerConnectorCentreMm": 105,
  "upperConnectorCentreMm": 2505,
  "extensionTopFaceMm": 4270,
  "topConnectorsAt420": false,
  "upperHorizontalProfilesAt420": false,
  "armAxisMm": 300,
  "armDirections": [
    "front",
    "back"
  ],
  "steps": [
    "İlk ayak ve alt bağlantı",
    "İlk alt yatay profil",
    "Orta ayaklı bağlantı",
    "İkinci alt yatay profil",
    "Sağ ayaklı bağlantı",
    "Sol 240 cm dikme",
    "Orta 240 cm dikme",
    "Sağ 240 cm dikme",
    "Üst kiriş: sol bağlantı",
    "Üst kiriş: ilk yatay",
    "Üst kiriş: orta bağlantı",
    "Üst kiriş: ikinci yatay",
    "Üst kiriş: sağ bağlantı",
    "Üst kirişi üç dikmeye oturt",
    "Sol 180 cm uzatma",
    "Sağ 180 cm uzatma",
    "Sol ön 30 cm kol",
    "Sol ön uç bağlantısı",
    "Sol arka 30 cm kol",
    "Sol arka uç bağlantısı",
    "Sağ ön 30 cm kol",
    "Sağ ön uç bağlantısı",
    "Sağ arka 30 cm kol",
    "Sağ arka uç bağlantısı",
    "Sol çerçeve: ilk gergi",
    "Sol çerçeve: ikinci gergi",
    "Sağ çerçeve: ilk gergi",
    "Sağ çerçeve: ikinci gergi",
    "Sol ön zemin–kol gergisi",
    "Sol arka zemin–kol gergisi",
    "Sağ ön zemin–kol gergisi",
    "Sağ arka zemin–kol gergisi",
    "Üst ön uzun kenar gergisi",
    "Üst arka uzun kenar gergisi",
    "Sol ön 240–420 cm gergisi",
    "Sol arka 240–420 cm gergisi",
    "Sağ ön 240–420 cm gergisi",
    "Sağ arka 240–420 cm gergisi",
    "Üst 240×180 açıklık: ilk çapraz",
    "Üst 240×180 açıklık: ikinci çapraz"
  ],
  "animationDurationSeconds": 360,
  "physicalParts": 226,
  "wrapperParts": 92,
  "mainPlane": "XY / z=0; four 30 cm arms and their braces extend front/back",
  "upperTensionArrangement": "Two 240 cm long edges, four arm-to-420 cm braces and two crossed 240×180 cm upper braces. Upper mapae align with hypothetical connector wing holes at 420 cm, without upper hubs, screws or horizontals.",
  "partList": [
    {
      "code": "PN-A-7",
      "quantity": 3,
      "massKg": 0.24
    },
    {
      "code": "M6 RH/LH mapa",
      "quantity": 32,
      "massKg": 0.05
    },
    {
      "code": "Ø6 gergi çubuğu",
      "quantity": 28,
      "massKg": null
    },
    {
      "code": "80 mm gergi birleştirici",
      "quantity": 12,
      "massKg": null
    },
    {
      "code": "PN-GV-M5x25",
      "quantity": 26,
      "massKg": 0.0048
    },
    {
      "code": "PN-KB-7",
      "quantity": 10,
      "massKg": 0.328
    },
    {
      "code": "PN-P-120-F",
      "quantity": 4,
      "massKg": 1.5722,
      "includedComponents": "2 PN-AB-7 + 2 insert + 2 M8×20; tekrar sayılmaz",
      "physicalPartsPerSet": 7
    },
    {
      "code": "M8×15",
      "quantity": 24,
      "massKg": null
    },
    {
      "code": "PN-P-240-F",
      "quantity": 3,
      "massKg": 2.8922000000000003,
      "includedComponents": "2 PN-AB-7 + 2 insert + 2 M8×20; tekrar sayılmaz",
      "physicalPartsPerSet": 7
    },
    {
      "code": "PN-P-180-F",
      "quantity": 2,
      "massKg": 2.2322000000000006,
      "includedComponents": "2 PN-AB-7 + 2 insert + 2 M8×20; tekrar sayılmaz",
      "physicalPartsPerSet": 7
    },
    {
      "code": "PN-P-30-F",
      "quantity": 4,
      "massKg": 0.5822,
      "includedComponents": "2 PN-AB-7 + 2 insert + 2 M8×20; tekrar sayılmaz",
      "physicalPartsPerSet": 7
    }
  ],
  "assemblyMassKg": null,
  "knownMassSubtotalKg": 27.483400000000003,
  "braceGroups": {
    "lowerFrameX": 4,
    "baseToArm": 4,
    "upperLongEdges": 2,
    "armToOpen420": 4,
    "upper240x180X": 2
  },
  "braceRecords": [
    {
      "a": [
        0.0245,
        0.1295,
        0
      ],
      "b": [
        1.1755,
        2.4805,
        0
      ],
      "normal": [
        0,
        0,
        1
      ],
      "D": 2617.63290015999,
      "rods": [
        551.6329001599902,
        2000
      ],
      "quaternion": [
        0,
        0,
        -0.22567710402999597,
        0.9742021580332463
      ]
    },
    {
      "a": [
        1.1755,
        0.1295,
        0
      ],
      "b": [
        0.0245,
        2.4805,
        0
      ],
      "normal": [
        0,
        0,
        -1
      ],
      "D": 2617.63290015999,
      "rods": [
        551.6329001599902,
        2000
      ],
      "quaternion": [
        -0.22567710402999594,
        0.9742021580332464,
        0,
        0
      ]
    },
    {
      "a": [
        1.2245,
        0.1295,
        0
      ],
      "b": [
        2.3754999999999997,
        2.4805,
        0
      ],
      "normal": [
        0,
        0,
        1
      ],
      "D": 2617.6329001599897,
      "rods": [
        551.6329001599897,
        2000
      ],
      "quaternion": [
        0,
        0,
        -0.22567710402999597,
        0.9742021580332463
      ]
    },
    {
      "a": [
        2.3754999999999997,
        0.1295,
        0
      ],
      "b": [
        1.2245,
        2.4805,
        0
      ],
      "normal": [
        0,
        0,
        -1
      ],
      "D": 2617.6329001599897,
      "rods": [
        551.6329001599897,
        2000
      ],
      "quaternion": [
        -0.22567710402999594,
        0.9742021580332464,
        0,
        0
      ]
    },
    {
      "a": [
        0,
        0.1295,
        -0.0245
      ],
      "b": [
        0,
        2.4805,
        -0.2755
      ],
      "normal": [
        -1,
        0,
        0
      ],
      "D": 2364.3608015698446,
      "rods": [
        298.3608015698446,
        2000
      ],
      "quaternion": [
        -0.037586283576341216,
        -0.7061071245122224,
        0.037586283576341216,
        0.7061071245122222
      ]
    },
    {
      "a": [
        0,
        0.1295,
        0.0245
      ],
      "b": [
        0,
        2.4805,
        0.2755
      ],
      "normal": [
        -1,
        0,
        0
      ],
      "D": 2364.3608015698446,
      "rods": [
        298.3608015698446,
        2000
      ],
      "quaternion": [
        0.037586283576341216,
        -0.7061071245122224,
        -0.037586283576341216,
        0.7061071245122222
      ]
    },
    {
      "a": [
        2.4,
        0.1295,
        -0.0245
      ],
      "b": [
        2.4,
        2.4805,
        -0.2755
      ],
      "normal": [
        1,
        0,
        0
      ],
      "D": 2364.3608015698446,
      "rods": [
        298.3608015698446,
        2000
      ],
      "quaternion": [
        -0.037586283576341216,
        0.7061071245122224,
        -0.037586283576341216,
        0.7061071245122222
      ]
    },
    {
      "a": [
        2.4,
        0.1295,
        0.0245
      ],
      "b": [
        2.4,
        2.4805,
        0.2755
      ],
      "normal": [
        1,
        0,
        0
      ],
      "D": 2364.3608015698446,
      "rods": [
        298.3608015698446,
        2000
      ],
      "quaternion": [
        0.037586283576341216,
        0.7061071245122224,
        0.037586283576341216,
        0.7061071245122222
      ]
    },
    {
      "a": [
        0.0245,
        2.505,
        -0.2755
      ],
      "b": [
        2.3755,
        2.505,
        -0.2755
      ],
      "normal": [
        0,
        1,
        0
      ],
      "D": 2351,
      "rods": [
        285,
        2000
      ],
      "quaternion": [
        0.5,
        0.5,
        0.5,
        -0.5
      ]
    },
    {
      "a": [
        0.0245,
        2.505,
        0.2755
      ],
      "b": [
        2.3755,
        2.505,
        0.2755
      ],
      "normal": [
        0,
        1,
        0
      ],
      "D": 2351,
      "rods": [
        285,
        2000
      ],
      "quaternion": [
        0.5,
        0.5,
        0.5,
        -0.5
      ]
    },
    {
      "a": [
        0,
        2.5295,
        -0.2755
      ],
      "b": [
        0,
        4.2805,
        -0.0245
      ],
      "normal": [
        -1,
        0,
        0
      ],
      "D": 1768.8985273327578,
      "rods": [
        1742.8985273327578
      ],
      "quaternion": [
        0.05029527577590297,
        -0.7053158053203018,
        -0.05029527577590297,
        0.7053158053203018
      ]
    },
    {
      "a": [
        0,
        2.5295,
        0.2755
      ],
      "b": [
        0,
        4.2805,
        0.0245
      ],
      "normal": [
        -1,
        0,
        0
      ],
      "D": 1768.8985273327578,
      "rods": [
        1742.8985273327578
      ],
      "quaternion": [
        -0.05029527577590297,
        -0.7053158053203018,
        0.05029527577590297,
        0.7053158053203018
      ]
    },
    {
      "a": [
        2.4,
        2.5295,
        -0.2755
      ],
      "b": [
        2.4,
        4.2805,
        -0.0245
      ],
      "normal": [
        1,
        0,
        0
      ],
      "D": 1768.8985273327578,
      "rods": [
        1742.8985273327578
      ],
      "quaternion": [
        0.05029527577590297,
        0.7053158053203018,
        0.05029527577590297,
        0.7053158053203018
      ]
    },
    {
      "a": [
        2.4,
        2.5295,
        0.2755
      ],
      "b": [
        2.4,
        4.2805,
        0.0245
      ],
      "normal": [
        1,
        0,
        0
      ],
      "D": 1768.8985273327578,
      "rods": [
        1742.8985273327578
      ],
      "quaternion": [
        -0.05029527577590297,
        0.7053158053203018,
        -0.05029527577590297,
        0.7053158053203018
      ]
    },
    {
      "a": [
        0.0245,
        2.5295,
        0
      ],
      "b": [
        2.3755,
        4.2805,
        0
      ],
      "normal": [
        0,
        0,
        1
      ],
      "D": 2931.4163812055085,
      "rods": [
        865.4163812055085,
        2000
      ],
      "quaternion": [
        0,
        0,
        -0.44870804982280954,
        0.8936784019009361
      ]
    },
    {
      "a": [
        2.3755,
        2.5295,
        0
      ],
      "b": [
        0.0245,
        4.2805,
        0
      ],
      "normal": [
        0,
        0,
        -1
      ],
      "D": 2931.4163812055085,
      "rods": [
        865.4163812055085,
        2000
      ],
      "quaternion": [
        -0.44870804982280954,
        0.8936784019009361,
        0,
        0
      ]
    }
  ],
  "engineeringAssumption": "Original PION profiles and connectors reused. Existing assembly-only M8 clearance assumptions retained; original production CAD is unchanged. Rod and coupler masses are unconfirmed. Every two-piece brace has a D−2066 mm short lower rod, a coupler at station D−2033 mm and a 2000 mm upper rod. Four new 30×180 cm braces are single D−26 mm rods. Their upper mapae stop at hypothetical 420 cm wing holes; no connector or fastening screw exists there. Future parts appear on their axes before insertion. The two upper extensions have open ends and no end screw. PION uyarlaması: özgün PN-KB-7, PN-P-…-F ve M8×15 arşiv geometrileri kullanılır; profil uç takımları toplamda bir kez sayılır. Taşıma kapasitesi ve imalat toleransı doğrulaması değildir.",
  "preview": "/catalog-sync/structures/pn-240x420-cift-cerceve-montaj/preview.svg",
  "files": {
    "residualGlbGzip": {
      "path": "/catalog-sync/structures/pn-240x420-cift-cerceve-montaj/residual.glb.gz",
      "sha256": "cd33a236649b458c1a0329df8d3780a3769601c6042126a00fa35774e5fcb6e9",
      "bytes": 2319460,
      "units": "m"
    }
  },
  "sourceId": "npn-240x420-cift-cerceve-montaj",
  "system": "PION SYSTEM",
  "name": "PION 420x240 Tavan Taşıyıcı ve Bölücü Strüktür Montajı",
  "revision": "2026-10-23-pion-catalog-sync-r1",
  "kind": "pion-adapted-structure",
  "category": "montajlar",
  "modelSrc": "/catalog-sync/structures/pn-240x420-cift-cerceve-montaj/residual.glb.gz",
  "src": "/catalog-sync/structures/pn-240x420-cift-cerceve-montaj/residual.glb.gz",
  "glbGzip": "/catalog-sync/structures/pn-240x420-cift-cerceve-montaj/residual.glb.gz",
  "thumbnail": "/catalog-sync/structures/pn-240x420-cift-cerceve-montaj/preview.svg",
  "replacements": [
    {
      "node": 0,
      "name": "BASE_0",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 9,
      "name": "BASE_1",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 18,
      "name": "BASE_2",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 27,
      "name": "TOP_0",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 30,
      "name": "TOP_1",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 33,
      "name": "TOP_2",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 36,
      "name": "ARM_CAP_0",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 39,
      "name": "ARM_CAP_1",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 42,
      "name": "ARM_CAP_2",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 45,
      "name": "ARM_CAP_3",
      "type": "hub",
      "code": "PN-KB-7"
    },
    {
      "node": 48,
      "name": "BAR_0",
      "type": "profile",
      "axisCm": 120,
      "code": "PN-P-120-F",
      "localMatrix": [
        0,
        -0.7071067811865475,
        -0.7071067811865476,
        0,
        1.0,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865475,
        0,
        0.5649999976158142,
        -2.6872988556636557e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 1129.9999952316284,
      "sourceCentre": [
        0.7999999976158142,
        0.10499999980997927,
        1.9002072439146202e-10
      ],
      "direction": [
        1.0,
        0.0,
        0.0
      ],
      "stockAxisMm": 1200,
      "extrusionLengthMm": 990,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 52,
      "name": "BAR_0_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 56,
      "name": "BAR_0_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 60,
      "name": "BAR_1",
      "type": "profile",
      "axisCm": 120,
      "code": "PN-P-120-F",
      "localMatrix": [
        0,
        -0.7071067811865475,
        -0.7071067811865476,
        0,
        1.0,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865475,
        0,
        0.5649999976158142,
        -2.6872988556636557e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 1129.9999952316284,
      "sourceCentre": [
        1.9999999976158143,
        0.10499999980997927,
        1.9002072439146202e-10
      ],
      "direction": [
        1.0,
        0.0,
        0.0
      ],
      "stockAxisMm": 1200,
      "extrusionLengthMm": 990,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 64,
      "name": "BAR_1_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 68,
      "name": "BAR_1_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 72,
      "name": "POST_0",
      "type": "profile",
      "axisCm": 240,
      "code": "PN-P-240-F",
      "localMatrix": [
        0,
        -0.7071067811865478,
        -0.7071067811865476,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865476,
        0,
        1.1649999618530273,
        -2.6872988556636557e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 2329.9999237060547,
      "sourceCentre": [
        1.9002111241439637e-10,
        1.504999961853027,
        1.9002072439146197e-10
      ],
      "direction": [
        0.0,
        1.0,
        0.0
      ],
      "stockAxisMm": 2400,
      "extrusionLengthMm": 2190,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 76,
      "name": "POST_0_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 80,
      "name": "POST_0_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 84,
      "name": "POST_1",
      "type": "profile",
      "axisCm": 240,
      "code": "PN-P-240-F",
      "localMatrix": [
        0,
        -0.7071067811865478,
        -0.7071067811865476,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865476,
        0,
        1.1649999618530273,
        -2.68729927199729e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 2329.9999237060547,
      "sourceCentre": [
        1.200000000190021,
        1.504999961853027,
        1.9002072439146197e-10
      ],
      "direction": [
        0.0,
        1.0,
        0.0
      ],
      "stockAxisMm": 2400,
      "extrusionLengthMm": 2190,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 88,
      "name": "POST_1_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 92,
      "name": "POST_1_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 96,
      "name": "POST_2",
      "type": "profile",
      "axisCm": 240,
      "code": "PN-P-240-F",
      "localMatrix": [
        0,
        -0.7071067811865478,
        -0.7071067811865476,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865476,
        0,
        1.1649999618530276,
        -2.68729927199729e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 2329.9999237060547,
      "sourceCentre": [
        2.4000000001900212,
        1.504999961853027,
        1.9002072439146197e-10
      ],
      "direction": [
        0.0,
        1.0,
        0.0
      ],
      "stockAxisMm": 2400,
      "extrusionLengthMm": 2190,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 100,
      "name": "POST_2_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 104,
      "name": "POST_2_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 108,
      "name": "TOP_BAR_0",
      "type": "profile",
      "axisCm": 120,
      "code": "PN-P-120-F",
      "localMatrix": [
        0,
        -0.7071067811865475,
        -0.7071067811865476,
        0,
        1.0,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865475,
        0,
        0.5649999976158142,
        -2.687301492443339e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 1129.9999952316284,
      "sourceCentre": [
        0.7999999976158142,
        2.704999999809979,
        1.9002072439146202e-10
      ],
      "direction": [
        1.0,
        0.0,
        0.0
      ],
      "stockAxisMm": 1200,
      "extrusionLengthMm": 990,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 112,
      "name": "TOP_BAR_0_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 116,
      "name": "TOP_BAR_0_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 120,
      "name": "TOP_BAR_1",
      "type": "profile",
      "axisCm": 120,
      "code": "PN-P-120-F",
      "localMatrix": [
        0,
        -0.7071067811865475,
        -0.7071067811865476,
        0,
        1.0,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865475,
        0,
        0.5649999976158142,
        -2.687301492443339e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 1129.9999952316284,
      "sourceCentre": [
        1.9999999976158143,
        2.704999999809979,
        1.9002072439146202e-10
      ],
      "direction": [
        1.0,
        0.0,
        0.0
      ],
      "stockAxisMm": 1200,
      "extrusionLengthMm": 990,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 124,
      "name": "TOP_BAR_1_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 128,
      "name": "TOP_BAR_1_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 132,
      "name": "EXTENSION_0",
      "type": "profile",
      "axisCm": 180,
      "code": "PN-P-180-F",
      "localMatrix": [
        0,
        -0.7071067811865478,
        -0.7071067811865476,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865476,
        0,
        0.8650000095367432,
        -2.6872988556636557e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 1730.0000190734863,
      "sourceCentre": [
        1.9002101249434004e-10,
        3.605000009536743,
        1.9002072439146197e-10
      ],
      "direction": [
        0.0,
        1.0,
        0.0
      ],
      "stockAxisMm": 1800,
      "extrusionLengthMm": 1590,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 136,
      "name": "EXTENSION_0_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 140,
      "name": "EXTENSION_1",
      "type": "profile",
      "axisCm": 180,
      "code": "PN-P-180-F",
      "localMatrix": [
        0,
        -0.7071067811865478,
        -0.7071067811865476,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865476,
        0,
        0.8650000095367432,
        -2.687301492443339e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 1730.0000190734863,
      "sourceCentre": [
        2.4000000001900212,
        3.605000009536743,
        1.9002072439146197e-10
      ],
      "direction": [
        0.0,
        1.0,
        0.0
      ],
      "stockAxisMm": 1800,
      "extrusionLengthMm": 1590,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 144,
      "name": "EXTENSION_1_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 148,
      "name": "ARM_0",
      "type": "profile",
      "axisCm": 30,
      "code": "PN-P-30-F",
      "localMatrix": [
        0,
        -0.7071067811865475,
        0.7071067811865478,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        0.7071067811865477,
        0.7071067811865475,
        0,
        0.11500000208616257,
        -2.68729927199729e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 230.00000417232513,
      "sourceCentre": [
        1.9002076269415701e-10,
        2.504999999809979,
        -0.35000000208616255
      ],
      "direction": [
        0.0,
        0.0,
        -1.0
      ],
      "stockAxisMm": 300,
      "extrusionLengthMm": 90,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 152,
      "name": "ARM_0_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 156,
      "name": "ARM_0_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 160,
      "name": "ARM_1",
      "type": "profile",
      "axisCm": 30,
      "code": "PN-P-30-F",
      "localMatrix": [
        0,
        0.7071067811865475,
        -0.7071067811865478,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        -0.7071067811865477,
        -0.7071067811865475,
        0,
        0.11500000208616257,
        -2.6872948311051914e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 230.00000417232513,
      "sourceCentre": [
        -1.9002068608876692e-10,
        2.504999999809979,
        0.35000000208616255
      ],
      "direction": [
        0.0,
        0.0,
        1.0
      ],
      "stockAxisMm": 300,
      "extrusionLengthMm": 90,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 164,
      "name": "ARM_1_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 168,
      "name": "ARM_1_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 172,
      "name": "ARM_2",
      "type": "profile",
      "axisCm": 30,
      "code": "PN-P-30-F",
      "localMatrix": [
        0,
        -0.7071067811865475,
        0.7071067811865478,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        0.7071067811865477,
        0.7071067811865475,
        0,
        0.1150000020861626,
        -2.687301076109705e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 230.00000417232513,
      "sourceCentre": [
        2.400000000190021,
        2.504999999809979,
        -0.35000000208616255
      ],
      "direction": [
        0.0,
        0.0,
        -1.0
      ],
      "stockAxisMm": 300,
      "extrusionLengthMm": 90,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 176,
      "name": "ARM_2_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 180,
      "name": "ARM_2_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 184,
      "name": "ARM_3",
      "type": "profile",
      "axisCm": 30,
      "code": "PN-P-30-F",
      "localMatrix": [
        0,
        0.7071067811865475,
        -0.7071067811865478,
        0,
        1.0000000000000004,
        0,
        0,
        0,
        0,
        -0.7071067811865477,
        -0.7071067811865475,
        0,
        0.11500000208616257,
        -2.687290390213093e-10,
        0,
        1.0
      ],
      "sourceSpanMm": 230.00000417232513,
      "sourceCentre": [
        2.399999999809979,
        2.504999999809979,
        0.35000000208616255
      ],
      "direction": [
        0.0,
        0.0,
        1.0
      ],
      "stockAxisMm": 300,
      "extrusionLengthMm": 90,
      "includedEndAdapters": 2,
      "includedInserts": 2,
      "includedEndScrews": 2
    },
    {
      "node": 188,
      "name": "ARM_3_M8_0",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    },
    {
      "node": 192,
      "name": "ARM_3_M8_1",
      "type": "screw",
      "code": "M8×15",
      "localMatrix": [
        0,
        -1.0,
        0,
        0,
        1.0,
        0,
        0,
        0,
        0,
        0,
        1.0,
        0,
        -0.01,
        0,
        0,
        1.0
      ],
      "sourceBearingMm": 50,
      "pionBearingMm": 40
    }
  ],
  "billOfMaterials": [
    {
      "code": "PN-A-7",
      "quantity": 3,
      "massKg": 0.24
    },
    {
      "code": "M6 RH/LH mapa",
      "quantity": 32,
      "massKg": 0.05
    },
    {
      "code": "Ø6 gergi çubuğu",
      "quantity": 28,
      "massKg": null
    },
    {
      "code": "80 mm gergi birleştirici",
      "quantity": 12,
      "massKg": null
    },
    {
      "code": "PN-GV-M5x25",
      "quantity": 26,
      "massKg": 0.0048
    },
    {
      "code": "PN-KB-7",
      "quantity": 10,
      "massKg": 0.328
    },
    {
      "code": "PN-P-120-F",
      "quantity": 4,
      "massKg": 1.5722,
      "includedComponents": "2 PN-AB-7 + 2 insert + 2 M8×20; tekrar sayılmaz",
      "physicalPartsPerSet": 7
    },
    {
      "code": "M8×15",
      "quantity": 24,
      "massKg": null
    },
    {
      "code": "PN-P-240-F",
      "quantity": 3,
      "massKg": 2.8922000000000003,
      "includedComponents": "2 PN-AB-7 + 2 insert + 2 M8×20; tekrar sayılmaz",
      "physicalPartsPerSet": 7
    },
    {
      "code": "PN-P-180-F",
      "quantity": 2,
      "massKg": 2.2322000000000006,
      "includedComponents": "2 PN-AB-7 + 2 insert + 2 M8×20; tekrar sayılmaz",
      "physicalPartsPerSet": 7
    },
    {
      "code": "PN-P-30-F",
      "quantity": 4,
      "massKg": 0.5822,
      "includedComponents": "2 PN-AB-7 + 2 insert + 2 M8×20; tekrar sayılmaz",
      "physicalPartsPerSet": 7
    }
  ],
  "massStatus": "partial-unverified-hardware-and-brace-masses",
  "packing": {
    "status": "pending",
    "capacity": null
  },
  "sourceGeometryVerification": {
    "retainedNodes": 353,
    "retainedMeshes": 43,
    "retainedBufferViews": 556,
    "allRetainedBufferViewsByteIdentical": true,
    "nodeMap": {
      "0": 0,
      "3": 1,
      "4": 2,
      "5": 3,
      "6": 4,
      "7": 5,
      "8": 6,
      "9": 7,
      "12": 8,
      "13": 9,
      "14": 10,
      "15": 11,
      "16": 12,
      "17": 13,
      "18": 14,
      "21": 15,
      "22": 16,
      "23": 17,
      "24": 18,
      "25": 19,
      "26": 20,
      "27": 21,
      "30": 22,
      "33": 23,
      "36": 24,
      "39": 25,
      "42": 26,
      "45": 27,
      "48": 28,
      "52": 29,
      "56": 30,
      "60": 31,
      "64": 32,
      "68": 33,
      "72": 34,
      "76": 35,
      "80": 36,
      "84": 37,
      "88": 38,
      "92": 39,
      "96": 40,
      "100": 41,
      "104": 42,
      "108": 43,
      "112": 44,
      "116": 45,
      "120": 46,
      "124": 47,
      "128": 48,
      "132": 49,
      "136": 50,
      "140": 51,
      "144": 52,
      "148": 53,
      "152": 54,
      "156": 55,
      "160": 56,
      "164": 57,
      "168": 58,
      "172": 59,
      "176": 60,
      "180": 61,
      "184": 62,
      "188": 63,
      "192": 64,
      "196": 65,
      "197": 66,
      "198": 67,
      "199": 68,
      "200": 69,
      "201": 70,
      "202": 71,
      "203": 72,
      "204": 73,
      "205": 74,
      "206": 75,
      "207": 76,
      "208": 77,
      "209": 78,
      "210": 79,
      "211": 80,
      "212": 81,
      "213": 82,
      "214": 83,
      "215": 84,
      "216": 85,
      "217": 86,
      "218": 87,
      "219": 88,
      "220": 89,
      "221": 90,
      "222": 91,
      "223": 92,
      "224": 93,
      "225": 94,
      "226": 95,
      "227": 96,
      "228": 97,
      "229": 98,
      "230": 99,
      "231": 100,
      "232": 101,
      "233": 102,
      "234": 103,
      "235": 104,
      "236": 105,
      "237": 106,
      "238": 107,
      "239": 108,
      "240": 109,
      "241": 110,
      "242": 111,
      "243": 112,
      "244": 113,
      "245": 114,
      "246": 115,
      "247": 116,
      "248": 117,
      "249": 118,
      "250": 119,
      "251": 120,
      "252": 121,
      "253": 122,
      "254": 123,
      "255": 124,
      "256": 125,
      "257": 126,
      "258": 127,
      "259": 128,
      "260": 129,
      "261": 130,
      "262": 131,
      "263": 132,
      "264": 133,
      "265": 134,
      "266": 135,
      "267": 136,
      "268": 137,
      "269": 138,
      "270": 139,
      "271": 140,
      "272": 141,
      "273": 142,
      "274": 143,
      "275": 144,
      "276": 145,
      "277": 146,
      "278": 147,
      "279": 148,
      "280": 149,
      "281": 150,
      "282": 151,
      "283": 152,
      "284": 153,
      "285": 154,
      "286": 155,
      "287": 156,
      "288": 157,
      "289": 158,
      "290": 159,
      "291": 160,
      "292": 161,
      "293": 162,
      "294": 163,
      "295": 164,
      "296": 165,
      "297": 166,
      "298": 167,
      "299": 168,
      "300": 169,
      "301": 170,
      "302": 171,
      "303": 172,
      "304": 173,
      "305": 174,
      "306": 175,
      "307": 176,
      "308": 177,
      "309": 178,
      "310": 179,
      "311": 180,
      "312": 181,
      "313": 182,
      "314": 183,
      "315": 184,
      "316": 185,
      "317": 186,
      "318": 187,
      "319": 188,
      "320": 189,
      "321": 190,
      "322": 191,
      "323": 192,
      "324": 193,
      "325": 194,
      "326": 195,
      "327": 196,
      "328": 197,
      "329": 198,
      "330": 199,
      "331": 200,
      "332": 201,
      "333": 202,
      "334": 203,
      "335": 204,
      "336": 205,
      "337": 206,
      "338": 207,
      "339": 208,
      "340": 209,
      "341": 210,
      "342": 211,
      "343": 212,
      "344": 213,
      "345": 214,
      "346": 215,
      "347": 216,
      "348": 217,
      "349": 218,
      "350": 219,
      "351": 220,
      "352": 221,
      "353": 222,
      "354": 223,
      "355": 224,
      "356": 225,
      "357": 226,
      "358": 227,
      "359": 228,
      "360": 229,
      "361": 230,
      "362": 231,
      "363": 232,
      "364": 233,
      "365": 234,
      "366": 235,
      "367": 236,
      "368": 237,
      "369": 238,
      "370": 239,
      "371": 240,
      "372": 241,
      "373": 242,
      "374": 243,
      "375": 244,
      "376": 245,
      "377": 246,
      "378": 247,
      "379": 248,
      "380": 249,
      "381": 250,
      "382": 251,
      "383": 252,
      "384": 253,
      "385": 254,
      "386": 255,
      "387": 256,
      "388": 257,
      "389": 258,
      "390": 259,
      "391": 260,
      "392": 261,
      "393": 262,
      "394": 263,
      "395": 264,
      "396": 265,
      "397": 266,
      "398": 267,
      "399": 268,
      "400": 269,
      "401": 270,
      "402": 271,
      "403": 272,
      "404": 273,
      "405": 274,
      "406": 275,
      "407": 276,
      "408": 277,
      "409": 278,
      "410": 279,
      "411": 280,
      "412": 281,
      "413": 282,
      "414": 283,
      "415": 284,
      "416": 285,
      "417": 286,
      "418": 287,
      "419": 288,
      "420": 289,
      "421": 290,
      "422": 291,
      "423": 292,
      "424": 293,
      "425": 294,
      "426": 295,
      "427": 296,
      "428": 297,
      "429": 298,
      "430": 299,
      "431": 300,
      "432": 301,
      "433": 302,
      "434": 303,
      "435": 304,
      "436": 305,
      "437": 306,
      "438": 307,
      "439": 308,
      "440": 309,
      "441": 310,
      "442": 311,
      "443": 312,
      "444": 313,
      "445": 314,
      "446": 315,
      "447": 316,
      "448": 317,
      "449": 318,
      "450": 319,
      "451": 320,
      "452": 321,
      "453": 322,
      "454": 323,
      "455": 324,
      "456": 325,
      "457": 326,
      "458": 327,
      "459": 328,
      "460": 329,
      "461": 330,
      "462": 331,
      "463": 332,
      "464": 333,
      "465": 334,
      "466": 335,
      "467": 336,
      "468": 337,
      "469": 338,
      "470": 339,
      "471": 340,
      "472": 341,
      "473": 342,
      "474": 343,
      "475": 344,
      "476": 345,
      "477": 346,
      "478": 347,
      "479": 348,
      "480": 349,
      "481": 350,
      "482": 351,
      "483": 352
    },
    "sourceGlbSha256": "d1f2eb8033394fada82057e4fea980a3da7667366fb12e97477a91a99947c68d",
    "sourceFile": "source.glb",
    "animationCount": 1,
    "replacementCounts": {
      "PN-KB-7": 10,
      "PN-P-120-F": 4,
      "M8×15": 24,
      "PN-P-240-F": 3,
      "PN-P-180-F": 2,
      "PN-P-30-F": 4
    },
    "profileEndpoints": [
      [
        [
          0.23499999761581425,
          0.10499999980997927,
          1.9002072439146202e-10
        ],
        [
          1.364999997615814,
          0.10499999980997927,
          1.9002072439146202e-10
        ]
      ],
      [
        [
          1.4349999976158143,
          0.10499999980997927,
          1.9002072439146202e-10
        ],
        [
          2.564999997615814,
          0.10499999980997927,
          1.9002072439146202e-10
        ]
      ],
      [
        [
          1.9002111241439637e-10,
          0.33999996185302694,
          1.9002072439146197e-10
        ],
        [
          1.9002111241439637e-10,
          2.6699999618530272,
          1.9002072439146197e-10
        ]
      ],
      [
        [
          1.200000000190021,
          0.33999996185302694,
          1.9002072439146197e-10
        ],
        [
          1.200000000190021,
          2.6699999618530272,
          1.9002072439146197e-10
        ]
      ],
      [
        [
          2.4000000001900212,
          0.33999996185302694,
          1.9002072439146197e-10
        ],
        [
          2.4000000001900212,
          2.6699999618530272,
          1.9002072439146197e-10
        ]
      ],
      [
        [
          0.23499999761581425,
          2.704999999809979,
          1.9002072439146202e-10
        ],
        [
          1.364999997615814,
          2.704999999809979,
          1.9002072439146202e-10
        ]
      ],
      [
        [
          1.4349999976158143,
          2.704999999809979,
          1.9002072439146202e-10
        ],
        [
          2.564999997615814,
          2.704999999809979,
          1.9002072439146202e-10
        ]
      ],
      [
        [
          1.9002101249434004e-10,
          2.740000009536743,
          1.9002072439146197e-10
        ],
        [
          1.9002101249434004e-10,
          4.470000009536743,
          1.9002072439146197e-10
        ]
      ],
      [
        [
          2.4000000001900212,
          2.740000009536743,
          1.9002072439146197e-10
        ],
        [
          2.4000000001900212,
          4.470000009536743,
          1.9002072439146197e-10
        ]
      ],
      [
        [
          1.9002076269415701e-10,
          2.504999999809979,
          -0.23500000208616256
        ],
        [
          1.9002076269415701e-10,
          2.504999999809979,
          -0.46500000208616254
        ]
      ],
      [
        [
          -1.9002068608876692e-10,
          2.504999999809979,
          0.23500000208616256
        ],
        [
          -1.9002068608876692e-10,
          2.504999999809979,
          0.46500000208616254
        ]
      ],
      [
        [
          2.400000000190021,
          2.504999999809979,
          -0.23500000208616256
        ],
        [
          2.400000000190021,
          2.504999999809979,
          -0.46500000208616254
        ]
      ],
      [
        [
          2.399999999809979,
          2.504999999809979,
          0.23500000208616256
        ],
        [
          2.399999999809979,
          2.504999999809979,
          0.46500000208616254
        ]
      ]
    ],
    "sourceBytes": 17148116,
    "residualBytes": 8497592,
    "gzipBytes": 2319460,
    "allProfilesCardinal": true,
    "allProfilesExactStockAxes": true
  },
  "dimensionsMm": [
    2400,
    4200,
    600
  ],
  "assemblyDurationSeconds": 360,
  "notes": [
    "Original PION profiles and connectors reused. Existing assembly-only M8 clearance assumptions retained; original production CAD is unchanged. Rod and coupler masses are unconfirmed. Every two-piece brace has a D−2066 mm short lower rod, a coupler at station D−2033 mm and a 2000 mm upper rod. Four new 30×180 cm braces are single D−26 mm rods. Their upper mapae stop at hypothetical 420 cm wing holes; no connector or fastening screw exists there. Future parts appear on their axes before insertion. The two upper extensions have open ends and no end screw. PION uyarlaması: özgün PN-KB-7, PN-P-…-F ve M8×15 arşiv geometrileri kullanılır; profil uç takımları toplamda bir kez sayılır. Taşıma kapasitesi ve imalat toleransı doğrulaması değildir.",
    "Birim kütlesi veya ambalaj kapasitesi doğrulanmamış kalemler bekleyen olarak gösterilir."
  ],
  "animationCount": 1,
  "sourceScriptRefs": [
    "/mount-page.js?v=9",
    "/mount-viewer.js?v=9",
    "/neopion-interface.js?v=20261013",
    "/archive/neopion-portal-detail.json"
  ],
  "code": "PN-240X420-CIFT-CERCEVE-MONTAJ"
}